World Sleep Industry ENCYCLOPEDIA

Turning Aids

1.1.5

Definition and product scope

Turning aids are a broad group of devices that help a person in bed change orientation, move to a new position or maintain an assessed posture; they are not one product design. Examples include low-friction slide sheets or tubes, handled turning sheets, repositioning slings used with a lift, wedges and modular supports, inflatable aids, and powered lateral-turning systems fitted to a frame or beneath a mattress. These products respectively reduce friction, distribute handling force, support the body, create controlled tilt or hold a final position. An ability to assist turning does not imply that a device can lift a person completely from the bed, replace a transfer lift or pressure-redistribution mattress, or remove the need for observation. The instructions and individual care plan define the valid task.

Individual assessment and turning goal

First define whether the turn is intended for skin inspection, hygiene, linen change, local pressure relief, respiratory comfort or a therapeutic posture. Assessment includes active participation, weight and shape, pain, joint range, muscle tone, fracture or spinal restrictions, postoperative precautions, wounds, skin tolerance, respiratory and circulatory status, cognition, dizziness and anxiety. Check every urinary catheter, drain, stoma, infusion, oxygen line and other device. Someone who can hold a support and flex the knees needs a different aid, staffing level and monitoring plan from a fully dependent person unable to report distress. Spinal instability, an unfixed fracture, or severe respiratory or circulatory instability requires a clinician-defined technique and stop criteria rather than a generic turning sequence.

Mechanisms and system compatibility

Sliding materials reduce bed-surface friction and help limit dragging and skin shear. A turning sling distributes controlled pull through several attachment points across the trunk. Positioning supports hold the final posture, while a powered lateral system cyclically alters support angle. Their load paths and stages of use differ; an ordinary sheet, restraint strap and lifting sling are not substitutes for one another. Dimensions, safe load, loops, spreader bar, air supply, retainers and drive unit must be compatible with the named system, and the lowest rated component limits the combination. Assess bed width, mattress depth and compression, frame articulation, effective rail height and gaps. A lateral-turning device can move the occupant toward a rail and increase the risk of climbing, falling or entrapment of the head, neck, chest or limbs.

Preparation, force and coordinated movement

Before turning, set the bed at a safe working height, manage brakes and rails according to the plan, clear the bedside and protect privacy. Explain the sequence, organise clothing and lines, and ensure that the receiving side has sufficient surface and its carers or supports are ready. Manual assistance should use low friction and coordinated staged movement, not pulling an arm, shoulder or neck or twisting only the legs. A larger or fully dependent person may need more staff or mechanical support. For a repositioning sling connected to a lift, verify every loop and hook, then pause during initial loading while the bed still supports the body to check attachments, balance and skin pinching. Apply force gradually. Pain, spasm, breathing difficulty, line traction, movement toward the edge or device displacement requires an immediate stop and return to safe support.

Establishing and verifying the position

After movement, confirm that head, neck, scapulae, spine, pelvis and limbs follow the individual plan and that the ear, fingers, heels, knees, ankles and lines are not trapped underneath. Supports should stabilise without creating a hard focal load, restricting breathing, unnecessarily preventing self-movement or forming a new gap. Offload planned skin and bony areas and observe colour, temperature, moisture, swelling and pain. A powered system’s angle, duration, sequence and pause criteria belong to the prescription or care plan, not to a generic promotional mode. Whether rails are raised, pads are used, the head end may be elevated or eating is permitted depends on the particular system. Before leaving, place the call control within reach and confirm that the body will not continue sliding or remain trapped in an inescapable position.

Cleaning, maintenance and abnormal events

Before each use, inspect slide sheets, slings and turning sheets for damaged seams, webbing, handles, labels, holes, thinning and contamination. Check air cells, hoses, pumps, straps, locks, sensors, cables and mechanical connections. Distinguish disposable from reusable parts and follow the specified washing, disinfection, drying and replacement method; excess heat, bleach or an incompatible chemical can weaken fabric or coatings. Unless explicitly designed and assessed for leave-in use, do not leave sliding material, hard handles, folded fabric or connection straps under the body. Never restore a damaged load-bearing part with knots, stitching, tape or extra straps. If a powered unit alarms, continues turning unexpectedly, leaks, loses power or jams, use the trained stop procedure and restore safe supine or other supported positioning before reporting and reviewing continued use.

Pressure-injury prevention and review

A turning aid can make repositioning more controlled and reduce some caregiver effort, but it cannot by itself guarantee prevention of pressure injury, respiratory complications or handling injury. Even with a pressure-redistribution mattress or automatic lateral system, the regimen must be individualised from mobility, skin and tissue tolerance, clinical state, comfort, sleep, treatment goals and support-surface performance; no interval or angle suits everyone. Record skin response, pain, sleep disruption, respiratory effect, device tolerance and changes in self-movement after turning. Reassess after changes in illness, weight, shape, cognition, wounds or lines, after replacing the mattress or rails, and after any fall, entrapment, skin damage or near miss.