1. Classification and Scope
1.1 WSIC Classification
Note: This classification is based on WSIC V1.0. This section will be updated when the classification system is revised; the main body of the document will remain unaffected.
| Item | Details |
|---|---|
| Primary category | Category 2: Pharmaceuticals and Medical Devices |
| Secondary category | 2.3 Therapeutic Medical Devices |
| Tertiary category | 2.3.1 Positive Airway Pressure and Ventilation Devices |
1.2 Product Boundary
This category covers therapeutic devices and associated consumables that use fluid-dynamic principles to provide positive airway pressure. Relevant products must obtain the medical-device registration, filing, or regulatory authorization required in the jurisdiction in which they are marketed.
The following are outside the scope of this guide:
- Consumer anti-snoring hardware, which belongs in the relevant consumer-electronics category rather than this medical-device category
- Invasive ventilation equipment and intensive-care ventilators, which are not ordinarily covered by the sleep industry
1.3 Related Tagging System
This section is the sole consolidated location for tag codes. Chinese names are used elsewhere in the source document; only this table needs to be updated when the tagging system changes.
| Tag type | Tag code | Tag name | Description |
|---|---|---|---|
| Scenario tag | S5.1 | Hospital sleep centers and outpatient clinics | — |
| Scenario tag | S5.3 | Rehabilitation-care support | — |
| Scenario tag | S5.4 | Telemedicine and remote follow-up | — |
| Value-chain position tag | M | Midstream integration and operations | — |
2. Technical Principles and Product Categories
2.1 Core Technical Principle
A positive airway pressure device uses a motor to generate a continuous airflow. The airflow is delivered through tubing and a mask to the user's upper airway, where positive pressure supports airway patency during sleep.
2.2 Main Product Categories
Products are primarily divided into the following categories according to technical mode and intended setting:
| Product category | Technical characteristics | Intended positioning |
|---|---|---|
| Continuous positive airway pressure (CPAP) | Delivers a constant, fixed pressure | Basic treatment settings |
| Auto-adjusting positive airway pressure (APAP) | Automatically adjusts output pressure in real time according to airway resistance | Home treatment requiring greater adaptability |
| Bilevel positive airway pressure (BiPAP) | Delivers different inspiratory and expiratory pressures for greater comfort | Users with lower tolerance or additional respiratory problems |
2.3 Core Components
- Main unit: contains the motor, sensors, and control module responsible for generating and regulating pressure
- Tubing system: connects the main unit to the mask and carries airflow
- Mask assembly: available as a nasal mask, oronasal mask, nasal pillows, and other types; it contacts the user directly and affects adherence
- Humidification unit: warms and humidifies airflow to improve comfort
- Data-monitoring module: collects usage duration, pressure, leak rate, respiratory events, and other data
2.4 Boundary with Consumer Anti-Snoring Products
| Dimension | Consumer anti-snoring products | Medical positive airway pressure devices |
|---|---|---|
| Regulatory status | Non-medical device | Class II medical device in Mainland China |
| Functional positioning | Assists with the experience of snoring | Used for the clinical treatment of sleep apnea |
| Method of use | Purchased and used independently at home | Used after assessment and prescription by a medical institution |
| Data accuracy | Reference grade | Clinical grade and subject to medical-device standards |
Consumer anti-snoring products must not claim to “treat sleep apnea,” “improve blood oxygen,” or provide other medical benefits. They must not use “ventilator” or an equivalent medical-device term as the product name and must not imply that they can replace medical positive airway pressure equipment.
3. Summary of Regulatory Requirements in Major Jurisdictions
The following summarizes regulatory frameworks in major jurisdictions for industry information only. It does not constitute a compliance determination. The laws currently in force in the applicable jurisdiction take precedence.
3.1 Mainland China (NMPA)
| Item | Details |
|---|---|
| Classification | Class II medical device |
| Registration | A medical-device registration certificate is required |
| Manufacturing authorization | A medical-device manufacturing license is required |
| Distribution requirements | A medical-device distribution filing or license is required, as applicable |
3.2 United States (FDA)
| Item | Details |
|---|---|
| Classification | Class II |
| Market-access pathway | 510(k) premarket notification |
| Quality-system requirement | Compliance with applicable quality-system requirements is required |
3.3 European Union (EU MDR)
| Item | Details |
|---|---|
| Classification | Usually Class IIa or IIb, depending on the specific functions |
| Conformity assessment | A notified body must participate in the conformity-assessment process |
| General requirements | Compliance with the General Safety and Performance Requirements (GSPR) is required |
4. Industry Selection and Quality Reference
The following dimensions are general references for service providers and distributors selecting products. They do not constitute a product recommendation. Product registration documents and instructions take precedence.
4.1 Core Technical Selection Dimensions
| Selection dimension | Reference description |
|---|---|
| Regulatory authorization | The product must hold valid medical-device registration or filing credentials in the jurisdiction in which it is marketed |
| Pressure accuracy | Stability and adjustment accuracy of pressure output are core technical indicators |
| Noise level | Operating noise directly affects suitability for the sleep environment |
| Humidification performance | The range and stability of heated humidification affect adherence |
| Data functions | Consider the range of collected data, export functions, and compatibility with follow-up systems |
| Consumable compatibility | Consider the interoperability and procurement cost of masks, tubing, and other consumables |
4.2 Quality and Compliance Reference Points
- The product should be supplied with complete registration credentials, instructions, and conformity documentation
- Consumables must be compatible with the main unit and hold the corresponding medical-device authorization
- Calibration, repair, and maintenance must comply with local medical-device management requirements
- Data collection and transmission must comply with local data-security and privacy laws
5. Compliance Risk Notices
5.1 Registration and Distribution Compliance
- Before being marketed, a product must complete the medical-device registration or filing required in the applicable jurisdiction; a product without the required authorization must not be sold
- Distributors must hold medical-device distribution credentials covering the relevant scope and maintain a complete product-traceability system
- Imported products must complete local imported-medical-device registration and related market-access procedures
5.2 Promotional and Advertising Compliance
- Medical-device promotion must not exceed the intended use approved in the registration certificate
- Patient testimonials, cure rates, effectiveness rates, and similar content must not be used in promotion
- Advertising-review approval must be obtained before publication when required by local law
- Avoid excessively technical or medicalized promotion directed at non-professional audiences
5.3 Compliance Boundary for Service Providers
- Non-medical institutions must not diagnose disease, issue prescriptions, or provide other medical services
- Instructions for use must strictly follow the product documentation and must not extend the use beyond the registered scope
- Related data may be used only as a reference for follow-up and must not be treated as a diagnostic basis
6. References and Regulatory Sources
Mainland China
- National Medical Products Administration: sleep-related device entries in the Medical Device Classification Catalogue
- National Medical Products Administration: regulations governing Class II medical-device registration
United States
- U.S. Food and Drug Administration (FDA): classification and 510(k) guidance related to continuous positive airway pressure devices
European Union
- Regulation (EU) 2017/745 on medical devices: relevant classification and general-requirement documents
Industry and Technical References
- Publicly available clinical research reviews of positive airway pressure technology
- Public industry information on product technical parameters and quality standards
Note: These materials are used only as sources for compiling industry information. This guide does not incorporate their mandatory provisions and does not represent full compliance with the cited laws or standards. Always consult the versions of laws and standards currently in force at the time of use.
Additional Notes
- This guide is a reference document within the World Sleep Industry Technology System (WSIT) and is provided for sleep-industry professionals. It does not certify, recommend, or endorse any product or service and does not replace applicable local laws and regulations.
- Medical-device requirements differ significantly across countries and regions. Product research and development, registration, manufacturing, distribution, and promotion must strictly comply with the laws currently in force where the product is marketed.
- Authors and industry-supporting organizations are listed on the contributors page (worldsleep.com/contributors) and supporters page (worldsleep.com/supporters).
- Medical devices must be used strictly in accordance with professional medical advice and the product instructions. This guide does not constitute medical advice or usage guidance.
© 2026 World Sleep Center. All rights reserved.
worldsleep.com